Accessories

Cable protector sprial wrap

Allows bundles of cables to be wrapped together without using ties which could cut cables with vibration. Also adds protection to the exposed cables. (approx 3ft in pack)

HHI2811 Sprial Wrap
Weight: 0.10 kg

Reciever strong box - protector

Padded receiver box with 4 screw holding cover. Gromet for cable exit and rubber anti rub strip for servo exit wires. Recommended for any receiver to add protection in that event of a hard landing with the ground and also minimises vibs which could cause RX failure.

HHI2200 strong box
Weight: 0.10 kg

Finishing caps - side frame caphead covers

The ideal way to finish those flat sided helicopters with these cap screw washers. Available in Purple, Silver and Blue. 8 per packet. Provides extra support to side frames. These being 4 mm are generally used on the engine mounts etc.

HHI111xx4MM
Weight: 0.10 kg

Finishing caps 3mm general side frame

Provided in packs of 20 - generally 3 packs required per helicopter. These add additional surface area to the cap head ie like washers and also are finished in anodised colours to set off the carbon,metal or G10 side frame on your helicopter. Can be used on all flat sided helicopters ie Raptor 60, All QWW helicopters, Furuta/Robbe Helicopters.

11100XX-3mm

Boom strut supports

A CNC Ali. cut boom brace support which allows your boom struts to be jointed midway between the frame and the boom. These provide additional strength to the booms. These are locked in place via a series of ties which are supplied with the kit.

HHI4066/8/9
Weight: 0.10 kg

60 size undercarriage

A complete undercarriage from the 60 QWW helicopter complete with white runners.

HHI4040
Weight: 0.10 kg

Hand canopy retainer screws

A set of 4 hand canopy retainer screws ideal for replacement over the M3 cap heads that are supplied as stock on most helicopters. These can be operated by hand so the canopy can be removed without the need of drives etc. Colours Red/Silver/Blue/Black

HHI2806/7/8
Weight: 0.10 kg

Landing dampers

4 off rubber isolator dampers assist loading on frame of undercarriage on heavy landings and also increase ground clearance (fit between u.c. and frame of heli) Bolts not supplied with units.

HHI2004B
Weight: 0.10 kg

Under carriage for 30/50 Helicopters

A kit comprising of 2 cross members in plastic and 2 off skids finished in blue anodising. These are used as stock on the Quick30 helicopter. See heli pictures of more info.

HHI4008
Weight: 0.10 kg

Tail pushrod guides

Plastic guides which are CA mounted to the boom. Expands to allow connection to most boom sizes.

HHI2901
Weight: 0.10 kg

Cap head selection bag - Hex bolt selection ** SOLD OUT **

A selection of nuts/bolts comprising of M3 x 6, M3 x 10, M3x16,M3x25,M3 Nylon Lock Nuts, M3 Washers, M4 washers and nuts. Approx 40-45 parts per bag. An ideal pack for the kit box for when you loose that bolt All Din rated and BS4168.

MISC003 Bolt set
Weight: 0.10 kg

Cross Head selection box with nuts and washers

app 330 items comprising of:-

M2 x 12

M2 x 19

M3 x 12

M3 x19

M4 x 12

M4 x 25

nuts and washers to suit also provided.

N53BU
Weight: 0.20 kg

Exhaust Plugs

Exhaust plugs ideal carpet saver in the car and house. Remember to remove before flight!

HHIEP1

Carbon boom supports with CNC metal ends

A pair of carbon boom supports that can be cut to length for the 60 size machine. Very nice quality with CNC ends in BLUE. Sorry no other photo present.

HHI4062BLUE ENDS
Weight: 0.10 kg

Cable ties

A pack of approx 80 cable ties for keeping your wiring neat and tidy. Coloured bundle including some white longer ties.

Design operating temps +85 oC to -40 oC.

RY07
Weight: 0.20 kg

Skid stoppers 4 per pack

Rubber stoppers that assist in minimising the risk of your helicopter from sliding off the the table at the field. Also protect the skids if you land on a concrete surface. 60 size helicopters due to dia of hole.

UH4766
Weight: 0.20 kg

4mm (bolt size) blade spacers - NHP

Blade spacers used when the root of your blades are smaller than the blade grips. 4 off supplied in the kit. 1mm thick each. Size 18.5mm dia.

NHPSP4MM
Weight: 0.20 kg

5mm (bolt size) blade spacers - NHP

Blade spacers used when the root of your blades are smaller than the blade grips. 4 off supplied in the kit. 1mm thick each. Size 18.5mm dia.

NHPSP5MM
Weight: 0.20 kg

Deluxe spacer set 4mm - 5mm

Blade spacer set comprising of 12 off spacers

4 x 4mm x 1mm thick

4 off 5mm x 2 mm thick

4 off 5 mm x 1mm thick

2 off brass sleeves are also provided to allow 5mm blade holes to be converted to 4mm bolt fittings.

NHPDWASH
Weight: 0.20 kg

Velcro retaining strap with loop end

A velcro strap system with a strong plastic hoop to allow you to alter your straps to retain the component. Easy to install and remove.

General uses:-

Receiver packs, Battery packs for flight packs

Receivers and receiver strong boxes/crash boxes

Large bundles of cables.

Price per strap. Length 305mm. Retaining length approx 250 mm max.

3727725
Weight: 0.20 kg

Velcro retaining cable straps

A velcro strap system with a area to allow a fixture to your helicopter if required. The hoop length can be altered to most sizes and the remaining velcro can be cut off. Due to being very soft the material minimises the allowance for cable rubbing when under flight loads which can be experienced with cable ties.

General uses:-

Cables and wiring retaining systems.

Large bundles of cables.

General light items that require retaining.

Price per strap. Length 203 mm.

722273
Weight: 0.20 kg

Security Clips

A clip system that assists in retaining connection leads together ie gyro to servo leads (CSM) and other extension leads that are used for heli and plane applications. Provides some addtional security to the socket and plug. Bottom picture only currently in stock

HHI2815
Weight: 0.20 kg

Exhaust deflector

Silicone exhaust stub suitable for most 30-90 size exhausts. 45 degree version.

L-IP171
Weight: 0.20 kg

Heli Antenna Pipe with Alu.base mount

A hollow pipe with base fixing which retains the pipe to allow you to route your receiver wire antenna

A-RAAT
Weight: 2.00 kg