Home > Electrics (Radios,gyro Etc)

Elec parts/others


Wallen Heli mast  
   Add to basketBasketAdd to favourites

A tuned mast to provide greater radio reception at the same distance.  The wallen mast comes complete with mounting brackets and allows your standard RX cable to be placed away after connecting the end to the wallen mast.    Installing a mast removes the risk to catching and cutting your RX cable in the blades and also makes the heli look great.



Heli mast WA001

Weight: 0.20 kg

Gold 4mm connectors 
   Add to basketBasketAdd to favourites
A kit comprising of 2 off male and 2 off female connectors which provide min. volt drop and very stong connections.  Heat shink is supplied for all 4 ends.  Ideal for over 20amp capacity draw ie batt packs over 1200 ma capacity.

MISC002 Electric conn

Weight: 0.01 kg

Cable wrap (sprial) for remote control helicopter/plane wiring 
   Add to basketBasketAdd to favourites
A combo pack of sprial wrap to allow cable looms to be formed to keep your wiring tidy, also acts as an outer protector to the single insulated cables.  3ft pack supplied (1m).  Application via pull back binder type system to remove the need to thread the cables.

UH2811

Weight: 0.01 kg

Helicopter Boom mounted taco with large display 
   Add to basketBasketAdd to favourites

A Taco that can be mounted on the boom of a Helicopter complete with a large display.

The taco has the following features:-

  • 2, 3 or 4 blade selector. *Plane or Heli*
  • Internal Battery or remote connection via spare servo channel
  • Can be boom or used by hand
  • Large display
  • Mounting boom kit supplied for all sizes


UH3808 Tach

Weight: 0.01 kg

Remote glow stick with high capacity battery - 120mm *SOLDOUT* 
   Add to basketBasketAdd to favourites

A remote glow adapter with long reach arm (120mm arm length) .  Battery is high capacity at approx 1800ma.  Charger is supplied for 5 hr charge to complete the package.



UH624

Weight: 0.01 kg

4 cell on-board receiver volt checker 
   Add to basketBasketAdd to favourites

A IC driven volt checker providing 10 output lamps for battery status on your helicopter or plane. Plugs into a spare channel on your receiver.  2 mounting gromets are provided with the unit as standard.



UHHH737VoltLED

Weight: 0.01 kg

Anolouge remote control receiver battery pack checker 
   Add to basketBasketAdd to favourites

A analogue meter for checking battery capacity for either 4 cell or 5 cell configurations.

Socket type is a dual pin to allow connection to most battery sockets.  Large scale meter for easy reading.

The unit is presented in a metal colour case with a nice large clear dial viewing window.

A clear plastic case is provided to protect the unit in transit.



UH007-7 Batt checker

Weight: 0.01 kg

JR receiver on/off switch 
   Add to basketBasketAdd to favourites


A JR battery to receiver lead with charger port.

JR batt lead

Weight: 0.10 kg

Field digitial test meter. 
   Add to basketBasketAdd to favourites

An ideal field tester which will display AC/DC voltage, resistance, power consumption up to 10A DC current.  Complete with battery and test leads.

UHQT18

Weight: 0.20 kg

Velcro retaining strap with loop end 
   Add to basketBasketAdd to favourites

A velcro strap system with a strong plastic hoop to allow you to alter your straps to retain the component. Easy to install and remove.

General uses:-

Receiver packs, Battery packs for flight packs

Receivers and receiver strong boxes/crash boxes

Large bundles of cables.

Price per strap.  Length 305mm.  Retaining length approx 250 mm max.



3727725

Weight: 0.20 kg

Velcro retaining cable straps 
   Add to basketBasketAdd to favourites

A velcro strap system with a area to allow a fixture to your helicopter if required.  The hoop length can be altered to most sizes and the remaining velcro can be cut off.  Due to being very soft the material minimises the allowance for cable rubbing when under flight loads which can be experienced with cable ties.

General uses:-

Cables and wiring retaining systems.

Large bundles of cables.

General light items that require retaining.

Price per strap.  Length 203 mm. 



722273

Weight: 0.20 kg

servo extension lead 
   Add to basketBasketAdd to favourites

300 mm length servo extension lead.

p-xft020-500

Weight: 0.20 kg

Futuba charger lead 1m length 
   Add to basketBasketAdd to favourites

Charger lead only for use on Futuba TXs, ideal for field chargers.

P-XFT202-1000

Weight: 0.20 kg

Security Clips  
   Add to basketBasketAdd to favourites

A clip system that assists in retaining connection leads together ie gyro to servo leads (CSM) and other extension leads that are used for heli and plane applications.  Provides some addtional security to the socket and plug.  Bottom picture only currently in stock

 



HHI2815

Weight: 0.20 kg

ShopFactory (TM). Click Here.