!
!

OS91SX-H C Spec with Pump
OS91 SX-H C Spec
!
A pumped 91 C Spec engine as developed with Mr Youngblood.   Ideal for any 90 size helicopter.

OS 50 SX-H Hyper helicopter engine
OS50SX-Hyper
!

A high quality OS 50 engine with greater power than most 50 size machines.  Ideal for 3D work in 50 class helicopters.

Quick Worldwide Hughes 300 EP10
QKEPH300
!

Based on the classic air frame for the EP10 this little helicopter comes complete with a Hughes 300 body kit.

Spec:-

440mm main bladdes

1000mm length - height 390mm - 120T main gear, belt drive tail

Raptor 30 - 50 metal tail upgrade
UHHTPV1000
!
A HT complete metal tail upgrade unit for the raptor 30 or 50

Curtis Youngblood Wildcat Heli Mix 30% Helicopter Fuel
!

Sold in boxes of 4 US gallons.  Shipping is included in price.  The ultimate performance for those you want to win!!

Duluxe exhaust plug by K&S
RKS619
!
8-9mm dia generally suitable for smaller exhausts.  No more oil dripping in the car or carpet!

JR short purple sticks
RKS735.1
!
Short cnc cut gimbes in purple to suit JR transmitters produced by K&S

LiPo Voltage Guard with audible and led alarm
JG012
!
Lipo packs must not be discharged below approximately 3.0 Volts per cell. Even a single deep discharge may permanently damage your pack. The tiny Lipo Voltage Guard operates in parallel with your Electric Speed Controller. It will flash a LED when your pack drops below a preprogrammed voltage threshold. The factory setting is for 3 cells , 3.0V per cell, with 'timed minimum hold'. The LiPo Voltage Guard may be easily reprogrammed to suit your own requirements with your transmitter/ receiver the supplied programming lead and your flight pack or power supply capable of any voltage between 5 and 45 volts.

Specifications:

Microprocessor controlled, auto calibrating, 10-bit A/D converter with digital signal processing.

Operating voltage: 5V - 45V

Minimum threshold: 5V (2 cells, 2.5V / cell)

Maximum threshold: 34V (10 cells, 3.4V / cell)

Precision: 1% or better

Current draw: 35mA during alarm state, <10mA otherwise

 

 

Super 60 starter
UHPRO60S
!
An ideal high torque starter for high compression engines.  Designed to start upto 60 size machines.

LI-PO charger

LPO-CHG
!
A simple to use charger for LI-PO cells.  Input 12 volts outputs from 1 to 4 cells ie 3.7v to 14.8v. Select your amp charge rate as per your battery supplier and leave the charger to get on with the job.  300-600-900-1200-1500-1800 rates.  Led indicator for status for charge etc.