Accessories
!

Cable protector sprial wrap
HHI2811 Sprial Wrap
!
Allows bundles of cables to be wrapped together without using ties which could cut cables with vibration. Also adds protection to the exposed cables.   (approx 3ft in pack)

Reciever strong box - protector
HHI2200 strong box
!
Padded receiver box with 4 screw holding cover. Gromet for cable exit and rubber anti rub strip for servo exit wires. Recommended for any receiver to add protection in that event of a hard landing with the ground and also minimises vibs which could cause RX failure.

Finishing caps - side frame caphead covers
HHI111xx4MM
!
The ideal way to finish those flat sided helicopters with these cap screw washers. Available in Purple, Silver and  Blue. 8 per packet.  Provides extra support to side frames.   These being 4 mm are generally used on the engine mounts etc.

Finishing caps 3mm general side frame
11100XX-3mm
!
Provided in packs of 20 - generally 3 packs required per helicopter.  These add additional surface area to the cap head ie like washers and also are finished in anodised colours to set off the carbon,metal or G10 side frame on your helicopter.  Can be used on all flat sided helicopters ie Raptor 60, All QWW helicopters, Furuta/Robbe Helicopters.

Boom strut supports
HHI4066/8/9
!
A CNC Ali. cut boom brace support which allows your boom struts to be jointed midway between the frame and the boom.  These provide additional strength to the booms.  These are locked in place via a series of ties which are supplied with the kit.

60 size undercarriage

HHI4040
!
A complete undercarriage from the 60 QWW helicopter complete with white runners.

Hand canopy retainer screws
HHI2806/7/8
!

A set of 4 hand canopy retainer screws ideal for replacement over the M3 cap heads that are supplied as stock on most helicopters.  These can be operated by hand so the canopy can be removed without the need of drives etc.  Colours Red/Silver/Blue/Black

Under carriage for 30/50 Helicopters
HHI4008
!

A kit comprising of 2 cross members in plastic and 2 off skids finished in blue anodising.  These are used as stock on the Quick30 helicopter.  See heli pictures of more info.

 

Tail pushrod guides
HHI2901
!

Plastic guides which are CA mounted to the boom.  Expands to allow connection to most boom sizes. 

Cap head selection bag - Hex bolt selection ** SOLD OUT **
MISC003 Bolt set
!
A selection of nuts/bolts comprising of M3 x 6, M3 x 10, M3x16,M3x25,M3 Nylon Lock Nuts, M3 Washers, M4 washers and nuts. Approx 40-45 parts per bag. An ideal pack for the kit box for when you loose that bolt All Din rated and BS4168.